cleankat for CAR Premium New Model
Car, Light Commercial and Duty Vehicles
Particulate Filter and Catalyst Cleaning System
It consists of two stages, hot and cold. 4500 watt heating element with a fluid reservoir 20 minutes at 85 degrees Celsius sufficient amount of organic chemical is added into the heated water. absorbing heat from the engine by organic chemical tubes and passed through the particle filter. the drug from the particle filter reaches back into the hot liquid chamber through the liquid filter. This process continues until the cleaning has finished.
After the cleaning process in order to rinse the machine is connected to the city water is discharged into the same reservoir through the cold water is thrown out of the way and the evacuation of the chamber machine. Drying of the micro pores in the particle filter for the continuation of this operation by compressed air, the drying process takes place.
Particulate filter holder at the top of the machine is made by a pneumatic foot pedal system with the help Patikül filter is designed to fully comprehend.
Dimension: W (1,35 m), L (1,00 m), H (2,55 m)
Weight : 180 Kg
First DPF or Catalytist cleaning usage:
First DPF or Catalyist cleaning usage : 0,5 Kg “cleankat Organic Chemical”
50 Lt clean water for first washing and 50 Lt for second operataion (rinsing). total water usage 100 Lt.
Second DPF or Catalytist cleaning usage:
Second DPF or Catalyist cleaning usage : 0,25 Kg “cleankat Organic Chemical”
50 liters of rinse water in the first operation is used for the washing process. 50 Lt for second operataion (rinsing).
The total usege of two washing:
0,75 Kg “cleankat Organic Chemical”
150 Lt water
Power Consumption : 7,5 Watt
Electrical voltage : 380 Volt
Fuse Amps : 32 A
Air Pressure : 6 Bar
The original catalytic converter and the particle filter recycling